Features
- REPLACEMENT:
- Under normal conditions it is recommended that each
set of two PF-2™ elements be replaced after 1,000
gallons The Royal Berkey® system is about 3.25 gallons
therefore the PF-2™ filters should be replaced after
1,000/3.25 or 307 refills. If the system is refilled
about one time per day, the PF-2™'s should be replaced
after 10 months, if the system is refilled about twice
per day, the PF-2™'s should be replaced about every five
months). Actual capacity is dependent on the presence of
other competing contaminants in the source water. High
levels of Fluoride, arsenic and heavy metals may reduce
the capacity and efficiency of the elements.
- FLUORIDE: Testing for fluoride was based on 20-30ppm
of the ion in the influent aqueous solution at a flow
rate of no more than 3 gpm per cubic foot of media.
Results of < 1ppm of the fluoride ion in the effluent
were typical for the media (>95% reduction). Under
optimum conditions, effluent concentrations of less than
50 ppb were readily achieved (>99.75% reduction).
- ARSENIC: This product uniquely targets the entire
family of arsenic oxide anions as well as the arsenic
cations.
- SIZE: Length 6", width 2.5" COLOR: WHITE
REPLACEMENT: 1,000 gallons
Out Price for set of two $59.00
E-Mail us for our Discount Code @
info@countrywp.com
Hinton International
Last Update: 9/02/2008
2005/2008
Site By:
info@countrywp.com
|